The independent appliance repair shop across the West
Dryer Repair — Book a Visit Today
We repair gas and electric dryers, all major brands, as an independent shop. Most dryer trouble traces back to airflow, heat, or a moving part that's worn out. Out here lint packs into long vent runs and dust rides in on the dry air, so we look at the whole path from the drum to the wall. A visit starts with your description, then a real look inside at the heating element, thermal fuse, belt, rollers, blower wheel, moisture sensor, and any vent restriction. Swing-shift hours help if your days are booked. Call us and tell us what it's doing.
Call (800) 712-6387- Real people on the phone
- 7 days a week
- Quote in writing before any work
Taking calls until 5:00 PM PT
The dryer symptoms we hear most
- Clothes come out damp every time Blocked vent, clogged lint path, or a failing moisture sensor
- Drum spins but there's no heat at all Heating element, gas igniter, thermal fuse, or thermostat failure
- Loud thumping and squealing when it tumbles Worn drum rollers, idler pulley, or a stretched belt
- Won't start when I press the button Door switch, start switch, thermal fuse, or control board fault
- Something smells hot or scorched Lint buildup near the element and restricted exhaust airflow
Safe things to check first
Worth a look before you call — sometimes it saves you the visit.
- 1Pull the lint screen all the way out and rinse it under water to see if softener film has coated it.
- 2Look behind the dryer for a crushed or kinked flex vent hose.
- 3Step outside and check that the vent flap actually opens while the dryer runs.
- 4Make sure the door latches fully and the breaker hasn't tripped on one leg.
Why homeowners pick a local independent shop
| Ben's Appliance Service | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| Quote in writing before a wrench comes out | ✓ | ✕ | ✕ |
| Phones answered by people, every day | ✓ | ✕ | ✓ |
| Gas and electric, all major brands | ✓ | ✓ | ✕ |
| No manufacturer targets to hit | ✓ | ✕ | ✓ |
| Crews familiar with homes like yours | ✓ | ✕ | ✓ |
Homeowners on how the visit went
“He explained every step before touching a screw. Quote on paper first, then the work.”
Luis G.Stockton, CA“Our oven was running forty degrees cold for months. One sensor later, cookies come out right again.”
Renee W.Reno, NV“No upsell talk at all. He fixed the drain pump and pointed out a hose I should watch, that was it.”
Jeff D.Gilbert, AZDryer Repair — quick answers
Why does my dryer take three cycles to dry a load?
Almost always airflow. Lint narrows the vent, so the hot wet air can't leave the drum, and clothes bake instead of drying. We check the whole run, clear what's blocking it, then test airflow and temperature before we call it fixed.
Is a squealing drum something I can ignore?
Better not to. Squealing usually means the rollers or idler pulley are worn. Keep running it and the belt can shred, or the drum can score the housing. Catch it early and the repair stays simple.
Do you handle gas dryers as well as electric?
Yes, both. Gas models add an igniter, gas valve coils, and a flame sensor to the list of suspects. Electric models lean toward heating elements and thermostats. We test the parts instead of guessing at them.
My dryer heats, then shuts off partway through. What's happening?
That pattern points at a thermostat or thermal cutoff reacting to overheating, and overheating usually traces back to restricted exhaust. Swapping the fuse by itself won't hold. The airflow problem has to be fixed with it.
Can hard water or dust really affect a dryer?
Indirectly, yes. Softener residue glazes the lint screen so air can't pass through, and fine outdoor dust settles in the blower housing and the vent. Both choke airflow, and that shortens the life of heating parts.
Should I repair or replace an older dryer?
Depends on what failed. Rollers, belts, elements, and switches are routine parts on most machines. If the drum is cracked or the cabinet is rusted through, we'll say so plainly and you can decide.
How it works
- Step 1
Tell us what it's doing
Ring us or fill in the form, and describe the noise, the smell, the error code and the brand. Small details help us load the right parts before we ever knock on your door.
- Step 2
We come look
Our tech tests the machine instead of guessing. You hear what failed and why, in plain words. Then you decide whether repairing it makes sense or replacing it makes more sense.
- Step 3
Repair and retest
Approved work gets done, often on the same visit. We run a full cycle before packing up, wipe down the area, then show you what changed so nothing surprises you next week.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- We know hard waterValley water leaves scale on everything, and we see it in clogged dishwasher jets and crusted washer valves. Water heaters groan, too. We check for mineral buildup out of habit, because around here it's usually part of the story.
- Swing-shift friendlyNot everybody is home at ten in the morning. We schedule around night shifts and split shifts, and around long commutes. Tell us the window that actually works for your household and we'll aim for it.
- Independent, not steeredNobody pays us to push a brand. We service all major makes as an independent shop, so our advice on repair versus replace comes from what we saw inside your machine.
- Straight talk on old unitsSome appliances aren't worth another part. We'll say so. If a repair is likely to buy you real time, we'll say that too, and let you pick from there.
- All major brands, gas & electricFrom Whirlpool and GE to Samsung, LG, Bosch and KitchenAid, serviced independently.
- Straight answersIf it isn't worth repairing, we'll say so, often right on the phone.
Dryer Repair
Small faults become big ones on a schedule of their own
Describe the symptoms and we'll book the visit — takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →