The independent appliance repair shop across the West
Oven Repair in Salt Lake City — Book a Visit Today
We repair ovens that won't heat or won't hold the temperature you set, across Salt Lake City and out toward Millcreek. Dinner goes in and the oven never gets hot, or it reads 350 and burns everything in twenty minutes. Could be a bad bake element, a failed igniter on a gas range, a temperature sensor drifting off, or a control board that quit talking. We test before we guess. Self-clean cycles trip fuses more often than people expect, so mention it if you ran one. Ben's Appliance Service covers all major oven brands and takes evening calls. Give us the make and the symptom.
Call (800) 712-6387- Real people on the phone
- 7 days a week
- Quote in writing before any work
Taking calls until 5:00 PM PT
Common oven faults in Salt Lake City homes
- "It preheats forever and never beeps." Weak bake element, or a temperature sensor reading high
- "Cookies burn on the bottom, raw on top." Failed element, a bad fan in convection models, or a sagging door seal
- "I smell gas but nothing lights." Igniter isn't drawing enough current to open the safety valve. Stop and call
- "Touchpad lights up, buttons do nothing." Membrane switch failure, or a control board that's lost its inputs
- "Door won't shut flush anymore." Stretched hinges, a worn gasket, or a warped inner panel letting heat out
Salt Lake City coverage
From Salt Lake City we cover 84101, 84105, and 84107 along with South Salt Lake, Millcreek, North Salt Lake, and Murray.
Other repairs we do in Salt Lake City
- Refrigerator Repair
- Washer Repair
- Dryer Repair
- Dryer Vent Cleaning & Repair
- Dishwasher Repair
- Stove & Range Repair
Oven Repair in cities near Salt Lake City
Why homeowners in Salt Lake City pick a local independent shop
| Ben's Appliance Service | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| Quote in writing before a wrench comes out | ✓ | ✕ | ✕ |
| Phones answered by people, every day | ✓ | ✕ | ✓ |
| Gas and electric, all major brands | ✓ | ✓ | ✕ |
| No manufacturer targets to hit | ✓ | ✕ | ✓ |
| Crews familiar with homes like yours | ✓ | ✕ | ✓ |
Homeowners on how the visit went
“The written quote listed the part number. I checked it online and the price was fair. Hired.”
Diane R.Stockton, CA“Stove igniter clicked forever and never lit. Fixed on the first visit with zero drama.”
Pete C.Reno, NV“A different company said replace the fridge. These folks fixed a relay and it has run six months since.”
Gloria M.Gilbert, AZOven Repair in Salt Lake City — quick answers
My oven runs hot. Is that a sensor or a board?
Most often the temperature sensor. It's a probe inside the cavity, and it drifts as it ages, so the control keeps heating past your setpoint. We measure its resistance cold and again hot. If it reads correctly, then we move on to the control board.
The igniter glows but the gas never lights. Why?
Glowing isn't enough. That igniter has to pull a specific amount of current before the safety valve will open. A weak one still glows orange while the valve stays shut. So we test the draw, not the color.
Can I keep using the oven with a broken door seal?
You can, but expect uneven results and a hotter kitchen. Heat escaping makes the oven cycle constantly, and the top and bottom bake differently. A flattened gasket is a quick fix compared to chasing temperature complaints that move around on you.
What does the self-clean cycle do to an oven?
It runs extremely hot, and that heat is hard on thermal fuses, door latches, and control boards. Plenty of ovens die right after a self-clean. If yours went dark after one, mention that when you call us.
How soon can you get to my house in Salt Lake City?
Tell us your ZIP and what the appliance is doing. Most Salt Lake City calls get a window within a day or two, and we run swing-shift appointments for folks who cannot take time off work. Call us and we will talk through the schedule.
How it works
- Step 1
Tell us what it's doing
Ring us or fill in the form, and describe the noise, the smell, the error code and the brand. Small details help us load the right parts before we ever knock on your door.
- Step 2
We come look
Our tech tests the machine instead of guessing. You hear what failed and why, in plain words. Then you decide whether repairing it makes sense or replacing it makes more sense.
- Step 3
Repair and retest
Approved work gets done, often on the same visit. We run a full cycle before packing up, wipe down the area, then show you what changed so nothing surprises you next week.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- We know hard waterValley water leaves scale on everything, and we see it in clogged dishwasher jets and crusted washer valves. Water heaters groan, too. We check for mineral buildup out of habit, because around here it's usually part of the story.
- Swing-shift friendlyNot everybody is home at ten in the morning. We schedule around night shifts and split shifts, and around long commutes. Tell us the window that actually works for your household and we'll aim for it.
- Independent, not steeredNobody pays us to push a brand. We service all major makes as an independent shop, so our advice on repair versus replace comes from what we saw inside your machine.
- Straight talk on old unitsSome appliances aren't worth another part. We'll say so. If a repair is likely to buy you real time, we'll say that too, and let you pick from there.
- All major brands, gas & electricFrom Whirlpool and GE to Samsung, LG, Bosch and KitchenAid, serviced independently.
- Straight answersIf it isn't worth repairing, we'll say so, often right on the phone.
Oven Repair in Salt Lake City
Each broken day has a price tag
Describe the fault, approve the written quote, get it fixed. Starting takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →